회사 블로그 Mingjiada Electronics Offers In-Stock Qorvo Products for Satellite Communications and Industrial IoT—Beamforming ICs, GaN Power Amplifiers, and Wireless SoCs

I. Mingjiada Electronics: A Stable Supply Channel for Genuine Qorvo Products in Stock

Shenzhen Mingjiada Electronics Co., Ltd. was established in 1996 and has over 20 years’ professional experience in the RF front-end sector. The company has long specialised in the supply of the full range of Qorvo products from stock and the buy-back of surplus inventory, establishing a comprehensive service system driven by the dual pillars of ‘supply and buy-back’. The company has obtained ISO 9001:2014 international quality management system certification and ISO 14001:2014 environmental management system certification, and has established a global service network covering Shenzhen, Hong Kong, Japan, Russia and Taiwan.

In terms of supply capacity, Mingjiada maintains a stock of mainstream Qorvo models, supporting rapid sample supply for small batches and stable supply for large volumes. Domestic stock can be dispatched on the same day, and the company provides supporting services such as one-stop BOM fulfilment, full-order buy-back and the disposal of obsolete stock.

II. Qorvo Satellite Communications Product Line

1. Ku-band Beamforming ICs – AWMF Series

Qorvo’s silicon-based Ku-band SATCOM beamforming ICs are core components of flat-panel phased-array antennas. The AWMF-0240 is a receiver (Rx) chip covering the 10.7 to 12.75 GHz frequency band. It supports four dual-polarised radiating elements and offers flexible polarisation configuration capabilities (RHCP/LHCP/linear polarisation). It features built-in 6-bit phase control and 7-bit gain control, utilises an FC-CSP package, and operates at a voltage of just +1.2 V. The complementary AWMF-0241 is the transmit (Tx) chip; when used in combination, the two enable the industry’s smallest, lowest-power and most efficient active phased array antenna solution.

In September 2025, Qorvo further launched the all-new TDD beamforming chip, the AWMF-0247, which supports transmission in the Ku-band from 13.75 to 14.5 GHz and reception from 10.7 to 12.75 GHz, integrating both transmit and receive functions onto a single chip. Compared with similar solutions, the AWMF-0247 reduces power consumption in the receive array by 40 per cent, improves signal clarity by over 20 per cent, and increases transmit efficiency by up to five times, making it particularly suitable for on-board and mobile platform terminals deployed in Low Earth Orbit (LEO) satellite constellations.

2. K-band GaN Power Amplifier – QPA1722

The QPA1722 is a high-performance K-band power amplifier manufactured by Qorvo using a 0.15 μm gallium nitride on silicon carbide (GaN-on-SiC) process. It covers a frequency range of 17.7 to 20.2 GHz, delivers a saturated output power of 40 dBm (10 W), offers a small-signal gain of 26 dB, and achieves a power added efficiency of 35 per cent. Integrated into a compact 6.0 × 5.0 × 1.64 mm SMT package, the device features an on-chip power detector, DC-grounded ESD protection for the input and output ports, and on-chip DC-blocking capacitors. Compared to similar competing products, it offers significant advantages, including three times the instantaneous bandwidth, a 38 per cent reduction in footprint, and a 10 per cent improvement in efficiency. The QPA1722 has been specifically optimised for LEO satellite communication uplink and radar applications, making it an ideal choice for space- and power-constrained satellite platforms and high-performance radar systems.

Mingjiada Electronics now offers genuine, in-stock satellite communication core components such as the AWMF-0240, AWMF-0241, AWMF-0247 and QPA1722, supporting bulk procurement and rapid delivery.

III. Qorvo Industrial IoT Product Line

1. QPG6200 Series Multi-Protocol Wireless SoC (Matter/Thread/Zigbee/BLE)

The Qorvo QPG6200 series is a multi-protocol wireless SoC platform designed for the industrial IoT and smart home markets. Utilising Qorvo’s proprietary ConcurrentConnect™ technology, it enables the concurrent operation of Matter over Thread, Zigbee and Bluetooth Low Energy. The series comprises four models: the QPG6200J, QPG6200L, QPG6200M and QPG6200N. All are based on the Cortex-M4F core, with a maximum clock speed of 192 MHz, and integrate 2,048 KB of flash memory and 336 KB of SRAM.

The positioning of each model differs significantly: the QPG6200J and QPG6200L utilise a compact QFN32 package (4×4×0.85 mm) and offer maximum transmit powers of 20 dBm and 10 dBm respectively, making them suitable for compact end devices such as smart lighting, sensors and thermostats; The QPG6200M and QPG6200N utilise a QFN40 package (5×5×0.85 mm) and feature Wi-Fi coexistence capability, making them suitable for gateway-type applications. The entire product range has achieved PSA Certified Level 2 security certification, with power consumption as low as 0.9 μA in 32 KB RAM hold mode, making it ideal for battery-powered industrial sensors and energy harvesting scenarios.

2. High-Precision UWB Positioning Devices

In the field of high-precision positioning for the Industrial Internet of Things (IIoT), Qorvo offers a complete range of UWB solutions, from chips to modules. The QPK3000 is a fully integrated UWB RTLS hardware module measuring just 20×20×3.2 mm. It supports UWB channels 5 (6.5 GHz) and 9 (8 GHz), as well as Bluetooth Low Energy and the IEEE 802.15.4 standard. It features an integrated high-efficiency planar antenna and operates within a temperature range of –40°C to +85°C. The module complies with the FiRa™ PHY/MAC specification and the omlox™ industrial positioning standard, enabling real-time positioning with centimetre-level accuracy. It is suitable for applications such as factory asset tracking, warehouse automation and industrial safety monitoring.

Furthermore, Qorvo’s third-generation UWB SoC—the QM35825—integrates a UWB transceiver, microcontroller and front-end module onto a single chip. It complies with the IEEE 802.15.4-2024 standard, features built-in AI and machine learning capabilities, supports the FiRa and Aliro protocols, and achieves a ranging accuracy of up to 5 cm with an angular measurement accuracy of ±2°.

3. Power Management ICs (PMICs)

Qorvo’s ACTIVECiPS™ configurable power management solutions provide highly integrated power supply solutions for industrial IoT devices. The ACT81460 and ACT81461 are low-power PMICs designed specifically for battery-powered systems; they integrate a linear charger to extend battery runtime and are suitable for IoT modules, wearable devices and general-purpose processor applications. The ACT43850 RF point-of-load step-down DC-DC converter provides a stable, low-noise power supply suitable for RF front-end power supply applications. Mingjiada Electronics currently has this model in stock as genuine, new-in-box units, with 1,000 pieces available in QFN-25 packaging.

IV. Mingjiada Supply Contact Details

Should you have any procurement requirements for Qorvo satellite communication or industrial IoT components, please feel free to contact Mingjiada Electronics to enquire about real-time stock availability and quotations:

Telephone enquiries: 86-755-83294757 / 13410018555

Email: sales@hkmjd.com

Company Address: Rooms 1239–1241, New Asia Guoli Building, Zhenzhong Road, Futian District, Shenzhen, Guangdong Province

Service Hours: 9:00–18:00

Company Website: www.integrated-ic.com