회사 블로그 Mingjiada Electronics Supply ADI LTC6993 Series TimerBlox Monostable Pulse Generator

Mingjiada Electronics Supply ADI LTC6993 Series TimerBlox Monostable Pulse Generator

Shenzhen Mingjiada Electronics Co., Ltd. — Long-term supplier of the [ADI] LTC6993 TimerBlox series of monostable pulse generators. With ‘single-resistor programming, small package size, low power consumption and high precision’ as their core advantages, these devices enable engineers to rapidly implement accurate single-pulse outputs and are widely used in industrial control, portable devices, communications, automotive electronics and consumer electronics.

LTC6993 — Single-Resistor-Programmed Monostable Pulse Generator
Product Overview
The LTC6993 is a monostable pulse generator (one-shot) in ADI’s TimerBlox series. Compared to traditional 555 timer or MCU solutions, the LTC6993 requires no complex programming or numerous external components; the output pulse width can be set using just a single external resistor, with a pulse width range spanning 1 µs to 33.6 s. With a supply voltage range of 2.25 V to 5.5 V, it is suitable for low-power, wide-voltage supply applications.

The LTC6993 series offers four trigger and output configurations, allowing designers to select the appropriate variant flexibly according to system timing requirements.
LTC6993-1: Rising-edge triggered, non-retriggerable
LTC6993-2: Falling-edge triggered, non-retriggerable
LTC6993-3: Rising-edge triggered, retriggerable
LTC6993-4: falling-edge triggered, retriggerable
The retriggerable versions can extend the output pulse width if a valid trigger is received again whilst the output pulse is in progress; the non-retriggerable versions ignore new triggers during the pulse, making them suitable for fixed-width pulse outputs.

Key Features
Pulse width range: 1 µs to 33.6 s
Single-resistor programming: Pulse width is set via an external resistor, simplifying design
Four trigger/output configurations: to meet rising-edge, falling-edge, and positive/negative pulse requirements
Low-power design: suitable for portable and battery-powered devices
Wide supply voltage range: 2.25 V to 5.5 V
Small-size packages: SOT-23-6, DFN-6, etc.
High-precision timing: low error and low jitter, enhancing system timing consistency
CMOS output drive: Provides strong source/sink current capability

The LTC6993 is suitable for applications requiring precise single pulses, delays or pulse broadening. Typical applications include:
Pulse broadening and delay circuits
Button debouncing and signal shaping
System reset and watchdog timing
LED pulse driving
Sensor interfacing and signal conditioning
Industrial automation control
Portable instruments and medical electronics
Communications equipment and automotive electronics

Mingjiada Electronics supplies the [ADI] LTC6993 TimerBlox monostable pulse generator, including but not limited to the following:
LTC6993CDCB-1
LTC6993CDCB-2
LTC6993CDCB-3
LTC6993CDCB-4
LTC6993CS6-1
LTC6993CS6-2
LTC6993CS6-3
LTC6993HDCB-1
LTC6993CS6-4
LTC6993HDCB-3
LTC6993HDCB-2
LTC6993HDCB-4
LTC6993HS6-1
LTC6993HS6-2
LTC6993HS6-3
LTC6993HS6-4
LTC6993IDCB-1
LTC6993IDCB-2
LTC6993IDCB-3
LTC6993IDCB-4
LTC6993IS6-1
LTC6993IS6-2
LTC6993IS6-3
LTC6993IS6-4
LTC6993MPS6-1
LTC6993MPS6-2
LTC6993MPS6-3
LTC6993MPS6-4

Mingjiada Electronics has long specialised in the distribution of electronic components and currently supplies the ADI LTC6993 TimerBlox series of monostable pulse generators on an ongoing basis. Available models include the LTC6993-1, LTC6993-2, LTC6993-3 and LTC6993-4, along with their various temperature grades and package versions. To check the latest stock levels for the ADI LTC6993 series or to enquire about pricing, please visit the Mingjiada Electronics website (https://www.integrated-ic.com/) for further supply details.