Shenzhen Mingjiada Electronics Co., Ltd. maintains a long-term supply of MP2890 components in stock. We also offer high-price buyback services nationwide for idle inventory and factory surplus of this model, providing comprehensive support—from component supply to inventory optimization—for servers, AI computing hardware, and data communication power solutions.
MP2890 Overview:
The MP2890 is a dual-channel digital multi-phase controller capable of powering core power supplies that utilize Pulse Width Modulation Voltage Identification (PWM-VID) control, while also being compatible with the AVSBus interface. The MP2890 can be used in conjunction with MPS’s Intelli-Phase™ products to implement a complete multi-phase voltage regulator (VR) solution with a minimum number of external components.
The MP2890 can be configured to operate with up to 20 phases on Rail 1 and up to 8 phases on Rail 2.
The device features on-chip non-volatile memory (NVM) for storing and restoring device configurations, and device configurations and fault parameters can be easily configured or monitored via the PMBus/I²C interface.
By monitoring the current-sampling output of the Intelli-Phase™ device, the MP2890 can monitor and report the output current (IOUT).
Based on a unique digital multiphase nonlinear control scheme, the device provides fast load transient response with minimal output capacitance. Since a single power-loop control method is used for both steady-state and load transients, power-loop compensation configuration is very simple.
The MP2890 is available in a QFN-64 (8 mm × 8 mm) package.
MP2890 Specifications
Number of input voltage rails: 2
Number of phases: 20
Minimum supply voltage (V): 3.1
Maximum supply voltage (V): 3.5
Typical quiescent current (mA): 50
Typical shutdown current (mA): 0.25
Minimum switching frequency (kHz): 100
Maximum switching frequency (kHz): 1000
Interface: PWM-VID/AVSBus
Processor type: ASIC, CPU/GPU
Package: QFN-64 (8x8)
MP2890 Features and Benefits
Digital controller with up to 20 phases and dual outputs
Supports Pulse Width Modulation Voltage Identification (PWM-VID) and is compatible with the OpenVReg specification (OVRi4+)
Supports AVSBus Rev. 1.3
Compliant with PMBus/I2C standards (1 MHz bus speed)
PMBus address configurable via pins
Built-in non-volatile memory (NVM) for storing configurations
Switching frequency (fSW) from 200 kHz to 3 MHz
Automatic loop compensation
Coupled inductor mode
Supports multiple configurations for 6 different applications
Flexible PWM allocation across two power rails
Automatic phase switching (APS) to improve overall efficiency
Active phase-to-phase current balancing with configurable offset for thermal equilibrium
Input voltage (VIN), output voltage (VOUT), current, and power monitoring
VIN under-voltage lockout (UVLO) protection, output over-voltage protection (OVP) and under-voltage protection (UVP), over-current protection (OCP), and over-temperature protection (OTP), with support for no-action, latch, or hiccup mode options
Intelli-Phase™ Fault Diagnosis
Automatically logs voltage regulator (VR) fault types to NVM
Digital load line regulation
Overclocking mode achieved by increasing VOUT offset
Available in a QFN-64 (8mm x 8mm) package
Mingjiada Electronics’ Supply and Recycling Services
In-Stock Supply: Mingjiada maintains a long-term in-stock supply of the MP2890GQQ, with inventory held in dual warehouses in Shenzhen and Hong Kong. We support small-batch sample purchases and direct bulk supply. All products are genuine factory-direct items with traceable batch numbers. Delivery takes 1–3 days, and minimum order quantities are flexible.
High-Priced Buyback: Serving businesses nationwide and overseas, we offer high prices for the buyback of idle inventory, factory surplus, project offcuts, and clearance stock of the MP2890GQQ and the full MPS product line. Our buyback scope covers brand-new, factory-sealed products, full trays of loose components, and hard-to-sell models. We support cash settlement and fast on-site pickup to help businesses liquidate inventory assets.
Contact Information: Phone: +86 13410018555 (Mr. Chen); Email: sales@hkmjd.com; Address: Rooms 1239–1241, New Asia Guoli Building, Zhenzhong Road, Futian District, Shenzhen.
담당자: Mr. Sales Manager
전화 번호: 86-13410018555
팩스: 86-0755-83957753
Korean
