회사 블로그 Mingjiada Supply/Recycle ADI ADXL313 Low Power 3-Axis Digital Accelerometer, Perception In UAV Flight Control Systems

With the rapid development of drones, robots, the Industrial Internet of Things (IIoT) and smart sensing devices, demand for low-power, compact and highly reliable MEMS accelerometers continues to grow. ADI’s (Analog Devices) ADXL313 low-power 3-axis digital accelerometer, featuring digital output, multiple range options and a wealth of motion detection functions, has become a popular choice for drone sensors, flight control systems and industrial monitoring.

Shenzhen Mingjiada Electronics Co., Ltd. — long-term supplier and recycler of the ADI ADXL313 low-power 3-axis digital accelerometer. This device features a compact size, low power consumption, 14-bit resolution and SPI/I²C digital interfaces, making it suitable for applications such as drone sensors, flight control and attitude stabilisation, vibration monitoring, industrial automation and automotive electronics.

ADXL313 Product Overview

The ADXL313 is a small, thin, low-power 3-axis accelerometer with high resolution (13 bits) and a measurement range of up to ±4 g. Digital output data is in 16-bit two’s complement format and can be accessed via a Serial Peripheral Interface (SPI) (3-wire or 4-wire) or an I²C digital interface. The ADXL313 is housed in a compact LFCSP package and supports both SPI and I²C digital interfaces, making it suitable for space-constrained, power-sensitive embedded designs. The device can be used to measure acceleration, tilt, vibration and motion status, and is widely applied in drone flight control, attitude detection, collision detection and industrial predictive maintenance.

ADXL313 Key Specifications and Performance Highlights

Type: Low-power 3-axis digital MEMS accelerometer

Range: Selectable ±0.5g, ±1g, ±2g, ±4g

Resolution: 14-bit

Interface: SPI, I²C

Supply voltage: 1.8V to 3.6V

Power consumption: Low-power design with typically low measurement and standby current

FIFO: 32-level FIFO to reduce the host’s polling load

Detection functions: Active/inactive, tap, free fall, etc.

Package: 12-pin LFCSP, approximately 3 mm × 3 mm × 1.0 mm

Operating temperature: Wide temperature range; specific details for the W version are subject to the data sheet

Applications: Drones, industrial, automotive, consumer electronics, robotics

The ADXL313’s Value in Drone Sensor Systems

Drones place high demands on sensor weight, power consumption, response speed and reliability. The ADXL313 can serve as a key accelerometer within a drone’s sensor system, used for:

Flight Control Attitude Stabilisation

Using three-axis acceleration data, it assists the flight control system in determining changes in the aircraft’s attitude, enhancing stability during hovering, manoeuvring and in windy conditions.

Vibration Monitoring and Fault Early Warning

Real-time monitoring of airframe vibrations helps analyse the condition of motors, propellers and the airframe, providing data support for flight safety.

Collision and Free-Fall Detection

Utilising built-in motion detection capabilities to identify abnormal changes in acceleration, it can be used for collision logging, emergency protection and fall detection.

Navigation Assistance and Sensor Fusion

When combined with gyroscopes, magnetometers and other sensors, it contributes to attitude calculation and inertial navigation, improving data reliability in complex environments.

Gimbal and Camera Stabilisation

It provides acceleration feedback for gimbal control, helping to achieve smoother filming results.

Consequently, the ADXL313 is not only suitable for drones but can also be used in robotics, industrial vibration monitoring, automotive electronics and portable devices.

Frequently Asked Questions (FAQ)
Q1: What interfaces does the ADXL313 support?
It supports SPI and I2C digital interfaces, facilitating connection to MCUs, flight control units and embedded systems.
Q2: Is the ADXL313 suitable for drones?
Yes, it is. With its low power consumption, compact size, three-axis digital output and motion detection capabilities, it can be used for flight control attitude control, vibration monitoring, collision detection and gimbal stabilisation.
Q3: Does Mingjiada Electronics supply the ADXL313?
Yes. Mingjiada Electronics supplies the ADI ADXL313 and supports samples, bulk orders, stock items and BOM fulfilment. Please enquire for specific stock levels and pricing.
Q4: Does Mingjiada Electronics accept returns of the ADXL313?
Yes. Mingjiada Electronics accepts returns of the ADI ADXL313 and various other electronic components on a long-term basis. Please provide the model number, quantity and batch number for a valuation.

Against the backdrop of sustained growth in the drone sensor and smart hardware markets, the ADI ADXL313 low-power 3-axis digital accelerometer offers significant application value thanks to its compact size, low power consumption, digital interface and extensive detection capabilities. Mingjiada Electronics provides ADXL313 supply and buy-back services to assist customers with their component procurement and inventory management needs.

To obtain ADXL313 datasheets, spot quotes, bulk delivery lead times or recycling valuations, please visit the Mingjiada Electronics website (https://www.integrated-ic.com/) for further details on supply and demand.
Tags: ADXL313WACPZ, ADXL313WACP, ADXL313WAC, ADXL313WA, ADXL313W, ADXL313